D) Personalizing A Programme; E) Choosing The 2+2 Function - CefarCompex Rehab 400 Handbuch

D) Personalising a programme
Not all programmes have an option
screen.
In certain programmes, you will need
to choose the muscle group you want to
stimulate. The target area is shown in
black on the figure above channel 1.
8a 8b 8c
8a: Press the On/Off button to return to
the previous screen.
8b: Use the channel 1 +/- button to
choose the desired treatment area. You
can choose among 7 areas.
8c: Press the channel 2 +/- button to
delete the warming-up sequence and to
choose if you want to combine with any
of the 2+2 programs on channel 3 and 4.
8d: Use the channel 3 +/- button to
choose the programme difficulty level.
8e: Use the channel 4 +/- button to
confirm your choices and launch the
programme.
Adjusting stimulation energies
When you start a programme, you will
be prompted to increase the stimulation
energies. This is the key to the success
of any treatment.
9a 9b 9c
9a: Press the On/Off button to return to
the previous screen.
8d 8e
9d 9e
9 b c d e: The unit will beep and the
symbols for the 4 channels will alternate
between + and 000. The energy level
for the 4 channels is at 0. To start the
programme, you will need to increase
the energy levels in the channels you
are going to use. To do this, use the cor-
responding + buttons.
NOTE: If you want to increase the
energy levels in all 4 channels simultane-
ously, press the i button. Press it twice
to increase the levels in the first 3 chan-
nels, and 3 times to increase the levels
in the first 2 channels. Interdependent
channels will be highlighted in white
against a black background.

E) Choosing the 2+2 function

You now have the possibility to choose
the 2+2 function which means that you
can choose one program for the channel
1 and 2, then select one program from
the 2+2 program list for channel 3 and 4.
This means that you could treat two
different body parts at the same time or
combine two different programs on the
same body part.
10a 10b 10c
10a: Press the On/Off button to return
to the previous screen.
10b: Use the channel 1 +/- button to
choose the desired treatment area, You
can choose from 7 areas.
10c: Press the channel 2 + to delete the
warming up sequence, by pressing the
channel 2 – the 2+2 mode is selected and
the first program in the list is displayed.
Press the channel 2 – again in order to
display the next program in the list.
10d: Use the channel 3 +/- button to
choose the program difficulty level
10e: Use the channel 4 +/- button to
confirm your choices and launch the
program.
10d 10e
ENG
13