Thermostat In Position - Bosch HB933R500 Gebrauchsanweisung

Instructions for the user
8.5 Rotisserie cooking
FUNCTION SELECTOR

THERMOSTAT IN POSITION

200
Prepare the rotisserie rod with the food, tightening the screws A of the
prongs. Fit the frames B into the holes of the drip tray F. Position the
rotisserie rod so that the pulley E is still in the guides on the cavity of
frame B on the right side. Insert the drip tray into the oven as far as it will
go until the tip of the rod is in line with the hole C. Now rock the frames B
to insert the tip of the rod into the drive connection C of the rotisserie
motor on the side of the oven. Pour a little water in the drip tray to prevent
smoke from forming.
Keep the oven door closed during cooking. Heating up time must not
exceed 60 minutes.
Regular flashing of the thermostat indicator light during cooking is normal
and indicates that the temperature is being maintained constant inside
the oven.
CAUTION: the frames B must be fitted
as shown in the figure to the side.
47