Safety Precautions; Electrical Safety - Casals CTR305 Bedienungsanleitung

English
Mitre Saw
CTR305
Dear Customer,
Many thanks for trusting to Casals.
Thanks to its continuous effort, our innovation
and the strictest quality controls, Casals develops
electric Power Tools for the toughest jobs.

SAFETY PRECAUTIONS

- WARNING! When using electric tools
basic safety precautions should always be
followed to reduce the risk of fire, electric
shock and personal injury including the
following.
- Read all these instructions before attempt-
ing to operate this product and save these
instructions.
WORK AREA SAFETY
- Keep work area clean and well lit. Cluttered or
dark areas invite accidents
- Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase
the risk of electric shock
- Do not operate the power tool near flammable
materials. Sparks could ignite these materials.
- Is required remove cut-off or other parts of
workpieces from the cutting area when the
appliance is running and the cutting head is in
the operating position.
- Remove all cutting from the work surface ensur-
ing it is completely clean.
CLOTHING AND PROTECTIVE EQUIPMENT
- Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewel-
lery or long hair can be caught in moving parts
- Non-skid footwear is recommended when work-
ing outdoors.
- Wear personal protective equipment. Depend-
ing on application, use face shield, safety
goggles or safety glasses. As appropriate, wear
dust mask, hearing protectors, gloves and work-
shop apron capable of stopping small abrasive
or workpiece fragments

ELECTRICAL SAFETY

- Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges or re-
frigerators. There is an increased risk of electric
shock if your body is earthed or grounded
- Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed
- Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
- When operating the power tool outdoors, use an
extension cord suitable for outdoor use. Use a
cord suitable for outdoor use reduces the risk of
electric shock
MAINTENANCE AND REPAIR
- Check the state of the power cord. Damaged
or tangled cables increase the risk of electric
shock.
- If the connection to the mains has been dam-
aged, it must be replaced, take the appliance to
an authorised technical support service. Do not
attempt to disassemble or repair the appliance
by yourself in order to avoid a hazard.
- Inspect extensions cords periodically and
replace if damaged.
- Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tool's operation. If damaged, have the power
tool repaired before use. Many accidents are
caused by poorly maintained power tools
- Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the
power tool is maintained
- Any misuse or failure to follow the instructions
for use renders the guarantee and the manufac-
turer's liability null and void.
- Take the appliance to an authorised technical
support service if product is damaged or other
problems arise. Do not attempt to disassemble
or repair the appliance yourself as this may be
dangerous.
- Check damaged parts. Before further use of
tool, it should be carefully checked to determine
that it will operate properly and perform its
intended function
- A guard or other part that is damaged should be
properly repaired or replaced by an authorized
service centre unless otherwise indicated in this
instructions manual.
- Do not use the power tool if the switch does not