IARP SMART N.3 I-P M ES Gebrauch Und Bedienung Seite 16

SEASONAL USE
When the unit is not used for a long time, please take note of the following procedures:
- unplug the unit;
- clean and dry the tank well;
- leave the glass door open to avoid possible formation of bad smells;
- cover the unit with a curtain, place it in a dry room and sheltered from the atmospheric agents.
TEMPERATURE SETTING AND CONTROLS
Each refrigerating appliance is provided with a thermostat for automatic maintenance of the
appropriate preestablished temperature inside the tank.
This temperature adjuster is gauged by the factory and should not be touched by the user.
Only if the average internal temperature is too cold or not cold enough should the knob by a screwdriver
turned. The numbers on the regulation plate are not related to temperature values but only to knob
reference position: a higher number corresponds to a lower temperature.
DISPOSAL
The cabinet contains oil, inflammable cooling gas, plastic and metallic components and glass .
Warning! Polyurethane insulation uses CICLOPENTHANE as expander, that doesn't affect the envi-
ronment but is inflammable. To guarantee the same respect when it's disposed of , never abandon the
equipment outside. Don't throw the packaging material from your equipment in the rubbish but sort
the various materials: eg.polystyrene, cardboard, plastic bags.
The demolition of the cabinet and the recovery of the component materials must be carried out according
to the local regulations in force in this matter.
THERMOSTAT
THERMOMETER
LIGHT
SWITCH
-16-