Sct 141X - Bosch SCT 141 serie Erstinbetriebnahme

Contents English
1. Symbols used
1.1 In the documentation
1.1.1 Warning notices -
Structure and meaning
1.1.2 Symbols in this documentation
1.2 On the product
2. User instructions
2.1 Important information
2.2 Related documents
2.3 Prerequisites
3. Scope of delivery
3.1 SCT 141x
3.1.1 SCT 1410 aligning equipment
3.1.2 SCT 1415 S1 aligning equipment
3.1.3 SCT 1415 S2 aligning equipment
3.2 SCT 410
4. SCT 141x assembly
4.1 Applying safety labels
4.2 Changing the ruler
4.3 Removing the handles
4.4 Changing the position indicator
4.4.1 Applying the "Indicator" label
(1 690 382 482)
4.4.2 Installing the position indicator on
the DAS 800/1000 (VAS 6430)
4.4.3 Setting the position indicator
without an offset
4.4.4 Setting the position indicator
with an offset
4.5 Aligning the DAS 800/1000 (VAS 6430)
4.6 Installing the lower end stops
4.7 Installing the upper end stops
4.8 Setting the pitch angle on the precision
measuring bar
4.9 Setting the yaw angle on the precision
measuring bar
4.10 Installing the mount for large calibration
boards
4.11 Installing the tape measure holder
4.12 Install the wall mount
5. SCT 410 assembly
5.1 Base plate assembly
5.2 Post assembly
5.3 Mounting bracket assembly
5.4 Attaching the mount for large calibration
boards to the SCT 410
Robert Bosch GmbH
18
18
18
18
18
18
18
18
18
19
19
19
19
19
19
19
19
20
20
20
20
21
21
22
22
23
25
27
27
28
28
29
29
29
30
30
31
| SCT 141x | 17 en
|
1 690 386 065 2017-09-29