Lock Function - Kaisai OSK 102 Bedienungsanleitung

How To Use The Advanced Functions
ECO function
NOTE: This function is only available under
COOL mode.
Used to enter the energy efficient mode.
Under cooling mode, press this button,
the remote controller will adjust the
temperature automatically to 24 C, fan
speed of Auto to save energy(but only
if the set temperature is less than 24 C).
If the set temperature is above 24 C ,
press the ECO button, the fan speed
will change to Auto, the set temperature
will remain unchanged.
NOTE:
Pressing the ECO button, or modifying
the mode or adjusting the set temperature
to less than 24 C will stop ECO operation. O
Under ECO operation, the set temper-
ature should be 24 C or more. it may O
result in insufficient cooling. If you feel
uncomfortable, just press the ECO
button again to stop it.
SLEEP Function
The SLEEP function is used to decrease
energy use while you sleep (and don t
need the same temperature settings to
stay comfortable). This function can
only be activated via remote control.
, ,
For the detail, see sleep operation in
,
,,
, ,
USER S MANUAL.
Note: The SLEEP function is not
available in FAN or DRY mode.
Follow me function
The Follow me function enables the
remote control to measure the temperature
at its current location and
to the air conditioner every 3 minutes interval
When using AUTO, COOL, or HEAT modes,
measuring ambient temperature from the
remote control (instead of from the indoor
unit itself) will enable the air conditioner to
optimize the temperature around you and
ensure maximum comfort.
O
O
O
,
,,
send this signal
.
13
82
Mode ON/OFF Fan
Timer Timer
Follow
LED
me
Self
Short
Turbo
clean
cut
Hold together for one second
to activate LOCK function

LOCK function

Press Turbo button and Self clean
button simultaneously for one second
to lock or unlock the keyboard.
Self clean function
Airborne bacteria can grow in the moisture
that condenses around heat exchanger in
the unit. With regular use, most of this
moisture is evaporated from the unit.
When the self clean feature is activated,
your unit will clean itself automatically. After
cleaning, unit will turn off automatically.
You can use self clean feature as often as
you like.
Note: You can only activate this function
in COOL or DRY mode.
Hold down this
button for 2
seconds to
activate sleep
function