Num'axes PIE1045 Gebrauchsanleitung Seite 19

1 – Light sensor (day/night)
2 – Indicator light side PIR sensors
3 – Start-up indicator light
4 – Indicator light central PIR sensor
5 – Lens
6 – Infrared LED
7 – Infrared LED
8 – Central passive infrared sensor (PIR) 19 – TV port (AV)
9 – Left passive infrared sensor (PIR)
10 – Right passive infrared sensor (PIR)
11 –MODE button
Button Functions
- ON: switches ON the device
3-position
- SETUP: to configure the settings
switch
- OFF: switches OFF the device
- Short presses on the MODE button allow you to switch from "Start a
MODE button
- In the settings menu, a short press on the MODE button allows you to
- In the settings menu, the  button allows you to move up.
- In time and date as well as password setting, the  button allows you
 button
- In SETUP mode, press the  button for approximately 3 seconds to
PIE1045 - Indice B – Mars 2020
video" to "Take a picture" then "View photos/videos (playback)" and
finally "Settings menu".
move back.
to go to the higher digits.
connect or disconnect the camera from WIFI.
12 –  navigation button
13 – LCD screen
14 – OK button + Manual capture (photo/video)
15 –  navigation button
16 – 3-position switch: ON / SETUP / OFF
17 – Battery compartment opening button
18 – External power port (DC)
20 – USB port
21 – SD card slot
22 – Speaker
19/76