Safety Instructions - ECG TK 2040 DR Bedienungsanleitung

CONVECTOR HEATER

SAFETY INSTRUCTIONS

Please read carefully and keep for future reference.
Warning: The safety measures and instructions contained in this
manual do not include all potential conditions and scenarios. The user
must understand that common sense, caution and care are factors that
cannot be integrated into a product. Therefore, the user is responsible
for these factors when using and operating this appliance. We are
not liable for any damages caused during shipping, by incorrect use,
voltage fluctuation or the modification or adjustment of any part of
the appliance.
To protect against the risk of fire or electric shock, basic precautions
must be taken while using electrical appliances, including the following:
1. Make sure the voltage in your outlet corresponds to the voltage
provided on the appliance label and that the socket is correctly
grounded. The outlet must be installed in accordance with
applicable electrical codes according to EN.
2. Do not operate the heat convector without the base properly
attached.
3. Do not operate the device if the cord is damaged. All repairs,
including cord replacements, must be carried out at a professional
service centre! Do not remove the protective covers from the
appliance; there is a risk of electric shock!
4. Protect the device against direct contact with water and other
liquids, to prevent potential electric shock.
5. Do not operate the convector outdoors or in a moist environment
and do not touch the cord or appliance with wet hands. Risk of
electric shock.
6. Close supervision is necessary for operating the heat convector
near children!
7. Make sure the convector is placed on a flat surface.
8. Do not use the convector near inflammable items or underneath
them, for example, near curtains. The temperature of surfaces
GB
35