Before First Use - Electrolux TW SL EEV Benutzerinformation

50 electrolux
Display
4
6 5
1 time to end / error message
2 cycle phase status
3 options
4 warnings
5 spin speed selection
6 dryness selection
Display description
dryness default
minimal dryness
medium dryness
maximal dryness
spin speed default
minimal spin speed
spin speed scope (200 rpm
step)
-

Before first use

Warning! If the appliance was not
transported in an upright position, leave it to
stand for 12 hours before connecting it to the
electricity supply and using it for the first time, so
that the oil can flow back to the compressor.
Otherwise the compressor could be damaged.
At the beginning of drying cycle (3-5 min.)
there might be a slightly higher sound level. It
is due to start of the compressor what is normal
2
3 1
maximal spin speed
iron dry (drying phase indica-
tor)
light dry (drying phase indica-
tor)
cupboard dry (drying phase
indicator)
strong dry (drying phase indi-
cator)
extra dry (drying phase indi-
cator)
cooling (drying phase indica-
tor)
crease guard (drying phase
indicator)
empty water reservoir (warn-
ing)
clean condenser (warning)
clean filters (warning)
child lock
long anti-crease
buzzer
time
delay start
cycle duration
time program scope (10 min
-
- 3h)
delay start scope
-
In order to remove any residues which may have
been produced during production, wipe the dryer
drum with a damp cloth or carry out a brief drying
cycle (ca. 30 min.) with damp cloths in the ma-
chine.
for compressor powered appliances like: fridges,
freezers etc.