Operation - Vacmaster JOEY Bedienungsanleitung

GB
CAUTION: Moving parts! To reduce the risk of personal injury, DO NOT touch the brush roll
when the vacuum cleaner is operating. Touching the brush roll while it is rotating can cause
personal injuries. Use caution when operating near children or pets (Fig. 5).
WARNING: Do not operate the vacuum cleaner without a filter in place.
1. Charging
NOTE: To optimise the battery longevity, ensure the vacuum cleaner is fully charged before first
use. Charge the vacuum cleaner for at least 5 hours before using for the first time. Never charge
the batteries in temperatures above 40°C or below 4°C. It is normal for the charger to become
warm when charging.
NOTE: Only recharge your vacuum cleaner with the supplied charger.
1) Before charging, make sure the cordless vacuum is turned OFF and the handheld vacuum
cleaner unit is installed in the main body.
2) Choose the desired plug to fit onto the charging adapter body for the operating region (Fig. 6).
NOTE: The three pin plug is for UK, while the two pin plug is suitable for almost all other European
countries.
3) Insert the desired plug into the charging power adapter. Align the support rails located on the
charging adapter body with the guide rails on the plug insert (Fig. 7). Slide the plug insert fully
towards the charging adapter body to lock into place until you hear a click (Fig. 8).
NOTE: To remove the plug, press the release latch on the charging adapter and slide the plug
insert off the charging adapter body (Fig. 9).
4) Insert the charging adapter into the charging port located on the side of the charging base and
secure the cord.
5) Insert the vacuum cleaner onto the charging base. Ensure all connections are clean and free of
dirt (Fig. 10).
6) Plug the charging adapter into a suitable power supply (Fig. 11).
NOTE: The vacuum cleaner sits against the charging pins on the base station to make the
vacuum always available for use. As a result, it does not lock into place during charging. Make
sure that there is nothing obstructing the connections which may prevent charging.
7) The handheld vacuum cleaner power switch will show the progress during charging. Whilst
the vacuum is being charged, the battery charging indicator will flash. Once fully charged, the
battery charging indicator will automatically turn off.

OPERATION

8