Starting Up - Carimali ETA BETA – LM Installation, Gebrauch, Wartung

Peripheral applications.
Serial output RS 232 C for:
- I/O interface
- mini-counter 1 key
- mini counter with 15 keys.
NOTE:
The registration and technical data plate of the machine is on the front of the machine itself.
Open the water mains supply tap and switch on the power line switch. The machine will automatically set itself to OFF status: red LED
on.
Press the N° 9 ( ON / OFF) key to switch the machin e on. The machine will set itself to ON status: B LED on.
Press the N° 9 ( ON / OFF ) key to switch the machi ne off. The machine will set itself to OFF status: A LED on.
The machine will automatically carry out the following operations:
Re-filling the boiler.
This operation will automatically stop when the level of the probe is reached.
Heating the boiler.
This phase will automatically stop when the pressure level in the boiler is reached.
PLEASE NOTE:
The pressure switch controls the temperature inside the boiler and the pressure gauge on the front of the machine indicates the
calibrating pressure which is normally 1-1.1 bars.
Infuser group heating.
During this phase the group will reach the standard temperature for which the machine has been preset. No electronic control is
provided.
The keypads will be functional when the "B" light is on. It is still necessary for the boiler to reach the correct pressure.
lb.00056.30

STARTING UP

Pag. 7 26/05/10