Whirlpool WBC 3546 A+NFCX Produktangaben Seite 3

A. Refrigerator Compartment
2. Lighting
3. Shelves / Shelf area
4. Multi-flow cold air system
5. Cooler compartment
6. Rating plate with commercial name
8. Crisper divider
9. Reversibility kit
10. Egg tray
11. Separator
12. Door trays
B. Freezer Compartment
13. Storage baskets for frozen food items
14. Shelves
15. Middle basket (freezing zone)
16. Ice tray and/or cold accumulator
18. The freezer door trays for pizza or other frozen products with a
short storage time
Depending on the model the number and type of accessories may vary.
The freezer compartment can be used without baskets and without upper
shelf to increase storage for large products.
Place the food products directly on the shelf.
After inserting food, ensure that the freezer compartment door closes
properly.
C. Control panel
Anti-bacterial protection:
1. Filter in fan (depending on the model)
7. Crisper with antibacterial additives (depending on the model)
17. Door seals
The crisper and the door seals are manufactured from materials that
inhibit bacterial growth.
Notes
- In case of power failure the cold accumulator helps to keep
optimal storage temperature longer.
- All shelves and door trays are removable.
- The internal temperatures of the appliance depend on the
ambient temperature, frequency of opening the doors, as well as
location of the appliance. Temperature setting must consider these
factors.
- The appliance accessories are not suitable for washing in
dishwasher.
HOW TO START THE APPLIANCE
Fit the spacers (if supplied) on the upper part of the condenser at the
rear of the appliance.
After plugging the appliance to the mains, it starts the operation
automatically.
After starting the appliance, wait at least 4-6 hours before placing food
into the appliance .
Particular control elements are activated:
• The indicator LEDs on the control panels light up for 2 seconds.
• Activation of a beep for 1 second.
Note:
• If food is placed in the refrigerator before the appliance has cooled
completely, it may deteriorate.
D GB F
PRODUCT SHEET
NL E P I GR
CONTROL PANEL DESCRIPTION
(1) Cavity selection "Fridge / Freezer" pushbutton
(2) Green LED ON/OFF informing of:
- freezer cabinet temp. setting (green LED light ON)
- fridge cabinet temp. setting - (green LED light OFF)
(3) Temperature selection button "Temp.°C".
(4) (5) (6) Green LEDs indicating temperature settings.
(7) "Reset alarm" pushbutton.
(8) Internal light switch.
Temperature Adjustment between cabinets is made
with the "Fridge / Freezer" button (1). When the
LED (2) is OFF the user can select temperature in
the fridge.
The temperature in the refrigerator compartment may be set by
the temperature setting pushbutton (3) on the control panel.
high temp.
med-high temp.
medium temp.
med-low temp.
low temp.
Description:
LED OFF LED ON
To adjust the temperature in the freezer
compartment, use the "Fridge / Freezer" button
(1) to control the temperature in the freezer
cabinet. The green LED (2) turns ON.
The temperature in the freezer compartment may be set by the
temperature setting pushbutton (3) on the control panel.
high temp.
med-high temp.
medium temp.
med-low temp.
low temp.
fast freezing (Freezer)
Description:
LED OFF LED ON
After setting the "Fast Freezing" (automatically disabled after 48 hours)
the freezer temperature is set to previous displayed setpoints. When the
product is disconnected from the power supply and then reconnected,
the control unit remembers previously set temperatures for freezer and
refrigerator.
FAN WITH A BUTTON
The fan improves temperature distribution inside the refrigerator
compartment, allowing better preservation of stored food.
By default, the fan is ACTIVE.
It is advisable to keep the fan active, so that the "Fresh Control" function
can work and also when the ambient air temperature is over 27 ÷ 28°C
or if you perceive drops of water on the glass shelves or in the severe
humidity conditions.
Note
Do not obstruct the air intake area with food items.
When Fresh Control is disabled remember to turn off the fan
when there is a lower ambient air temperature. To turn off the fan
press the button (1a).
If the appliance has the fan it can be equipped with the antibacterial
filter.
Remove it from the box (found in the crisper drawer (item 7) and insert
into the cover of fan (item 1b).
The replacement procedure is attached with the filter.
S N DK FIN PL
On the left there are described the 5 set
points for the fridge compartment.
At each short pressure of the "Fridge /
Freezer" button (1), the setpoint will change
(cyclically).
The medium temp. is the recommended
temperature settings.
On the left are described the 5 set points for
the freezer compartment and fast freezing.
At each short pressure of the "Fridge /
Freezer" button (1), the setpoint will change
(cyclically).
The medium temp. is the recommended
temperature settings.
CZ SK H RUS BG
GB
RO