JANE BABYSIDE Bedienungsanleitung Seite 10

Lastly, position the base frame so that the ends are lined up with the anchor points halfway up the co-sleeping
cot and insert them until you hear both ends click into place.
Check that it is securely fastened.
"click"
OK
Once the base frame is assembled fit the upholstery by fastening the Velcro strips (4) found on the underneath
of the upholstery (4) to the base frame tube.
Place the mattress on the bottom of the cot. If you wish to add an extra mattress or use a thicker one remember
that there is a maximum recommended height for the mattress.
Lock all four wheels of the co-sleeping cot, lowering the levers to lock them so that the red mark is fully visible
on the wheels.
STOP
The cot is now ready for use.
To dismantle the co-sleeping cot, follow the same steps in reverse.
10