Preparing For Treatment; Assembling The Nebuliser - Pari COMPACT 2 Gebrauchsanweisung

Set the compressor up as follows:
• Place the compressor on a firm, flat, dust-free, dry surface.
• Plug the power plug into a suitable socket.
CAUTION! Route the power cord in such a way that it is
not a tripping hazard and no one can become entangled in
it. Poorly routed cable connections pose a risk of injury.

3.2 Preparing for treatment

Assembling the nebuliser

CAUTION
Risk of impaired treatment
Damaged components and/or an incorrectly assembled
nebuliser may impair functioning of the nebuliser and thus
treatment as well.
• Check all nebuliser components and the accessories
before each use.
• Replace any broken, misshapen or seriously discoloured
parts.
• Follow the assembly instructions in these instructions for
use.
• Insert the nozzle insert in the
nebuliser lower section.
• Gently twist the nozzle insert
clockwise to lock it in place.
– 19 –