Range of fastening capacity
360
300
240
180
120
60
0
3
4
5
004252
Range of fastening capacity
360
300
240
180
120
60
0
3
4
5
006302
Range of fastening capacity
360
300
240
180
120
60
0
5
6
7
8
004253
Range of fastening capacity
360
300
240
180
120
60
0
5
6
7
8
004254
NOTE:
The revolution angle means the angle which a
•
screw/bolt revolves when the tool attains to 100%
from 50% of desired torque.
Use of a low temperature conditioned battery
•
cartridge may sometimes give warning for battery
cartridge capacity by warning lamp and beeper
which makes the tool stop immediately. In this
case, the range of fastening capacity may be
inferior to those shown in the above even if a
charged battery cartridge is used.
All manuals and user guides at all-guides.com
BFT080F
6
7
8
Torque
N.m
BFT081F
Torque
6
7
8
N.m
BFT122F
9
10
11
12
Torque
N.m
BFT123F
9
10
11
12
Torque
N.m
MAINTENANCE
CAUTION:
Always be sure that the tool is switched off and the
•
battery cartridge is removed before attempting to
perform inspection or maintenance.
Never use gasoline, benzine, thinner, alcohol or
•
the like. Discoloration, deformation or cracks may
result.
Replacing carbon brushes
Fig.12
Remove and check the carbon brushes regularly.
Replace when they wear down to the limit mark. Keep
the carbon brushes clean and free to slip in the holders.
Both carbon brushes should be replaced at the same
time. Use only identical carbon brushes.
Use a screwdriver to remove the brush holder caps.
Take out the worn carbon brushes, insert the new ones
and secure the brush holder caps.
Fig.13
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers,
always using Makita replacement parts.
OPTIONAL ACCESSORIES
CAUTION:
These
accessories
•
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to
persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Makita genuine battery and charger
•
Automatic refreshing adapter
•
Adjust grip
•
Protector
•
Grip Base Set
•
Grip 37
•
Anti kickback head
•
NOTE:
Some items in the list may be included in the tool
•
package as standard accessories. They may differ
from country to country.
9
or
attachments
are
Only use
accessory or