Settings; Setting The Acoustic Signal And Lock Parameters - Pelgrim CK1064R Anleitung

SETTINGS

Setting the acoustic signal and lock parameters

You can adjust the volume of the acoustic signal, duration of acoustic alarm,
and automatic lock settings.
Activate the setting menu:
1. Switch off the appliance.
2. Press and hold the Stop & Go key for approx. 3 seconds.
▷ The first parameter "Uo" will appear on the timer display, indicating the volume
(loudness) of acoustic signals.
Press the '–' or '+' timer keys to select the type of parameter:
Uo - acoustic signal and alarm volume (loudness)
▷
▷ So - alarm duration
Lo - Automatic lock
▷
• The currently set value will appear on the right cooking zone power level displays.
The value can be adjusted by pressing the '–' or '+' keys for the front right cooking zone.
• All parameters can be confirmed and stored by pressing and holding the
Stop & Go key for 2 seconds. Then, a short beep will be heard.
• If you do not wish to store the new parameter settings, close the user settings
mode by pressing the on/off key.
EN 16