Product Overview; Indicators - Cino CN-KA Handbuch

Product overview

WIFI (Option)
Volume
/Power
Handle
Capsule holder
Drip grip
Drip tray
* Note: The blue word power button and coffee cup volume button are
CN-KA model machines.

Indicators

1.KA
Machine heating up: Indicators of power button will always be ON.
Indicators of small cup and large cup will blink together at 1 Hz. Heating
up takes 45 seconds.
Standby mode: volume button indicators will always be ON.
power saving mode: Only the power indicator will be constantly ON.
Water shortage: the machine will signal a warning: the medium cup indicator
blinks at 2 times/s continuously and the machine beeps continuously at 2
times/s.
Handle not closed: the small cup indicator blinks at 2 times/s continuously.
4
2.KB
Power
Volume selector
Brew
30ml
Temperature
/Volume button
50ml
big：120ml
medium：50ml
70ml
small：30ml
Water tank
100ml
120ml
150ml
200ml
Machine heating up: brewing indicators will blink at 1Hz, power indicators will
always be on, one of volume indicators will always be on, preheating time 45s.
After heating up, the machine goes into standby mode.
Stanby mode : indicators of brewing and volume will always be on.
If you open the handle in the Pre-heat mode, the temperature can't be selected.
WiFi instructions (Option)
When WiFi indicator is ON, WiFi connection is successful; When WiFi
indicator blinks, WiFi connection is not successful. To erase WiFi
connection record: turn volume switch to 7 ( max volume ), turn
temperature switch at red, open the handle, press brewing button twice,
then power off and restart the machine.
Temperature
selector
Blue light: ambient
temperature
Green light：40-45℃
Yellow light：70-75℃
Orange light：80-85℃
Red light：90-95℃
5