Technical Data - stabo xm 3006e VOX 12/24 Bedienungsanleitung

Reset
Switch on the device while pressing the EMG key. rS flashes in the display.
Press the F key until a beep sounds. rS stops flashing.
Now release the F key and the device restarts automatically with the factory setting.
Configuration of the microphone plug connector (six-pin)
1 Modulation
2 ‒
3 TX
4 ‒
5 Ground
6 Power supply

Technical data

General
Channels:
Operating modes:
Frequency range:
Antenna impedance:
Supply voltage:
Dimensions (WxHxD):
Weight:
In the box:
Transmitter
Frequency stability:
Transmission power:
FM deviation:
Modulation depth:
Spurious emissions:
Frequency response:
Adjacent channel power:
Microphone sensitivity:
Power consumption:
Receiver
Sensitivity (20 dB SINAD):
Frequency response:
Adjacent channel selection:
LF output power:
Squelch sensitivity:
Image frequency suppression: 70 dB
Power consumption:
40 (80)
AM/FM
26.565 MHz to 27.99125 MHz
50 ohms
13.2 / 26.4 V DC voltage
115 x 35 x 165 mm
approx. 0.6 kg
,
CB Radio device hand-held electret microphone with mount,
mounting bracket, mounting material
+/- 600 Hz
4 W AM / 4 W FM
≤ 2 KHz
≥ 85%
Under 4 nW (- 54 dBm)
300 Hz - 3 KHz in AM/FM
Under 20 µW
< 3 mV
2 A max.
≤ -107 dBm
300 Hz - 3 KHz
60 dB
2 W
minimum < 1 µV
300 mA nominal / 750 mA max.
24
13.2 V