Transport; Assembly; Preparatory Activities; Checking The Delivery Content - HOLZMANN-MASCHINEN SB 163VH Betriebsanleitung

13

TRANSPORT

The drill is heavy! At least two people are required to carry it. For longer
transports, disassemble the drill and transport it in its original packaging!
To ensure proper transport, observe the instructions and information on the transport packaging
regarding centre of gravity, attachment points, weight, means of transport to be used etc. as well
as existing transport rules.
The drill press is heavy. There are at least two people required to carry it. When carrying the drill,
grasp it once under the base plate and hold it by the drill column, but do not carry the drill by the
motor unit!
If you transport the drill with a vehicle, make sure that the load is properly secured!
14

ASSEMBLY

14.1 Preparatory Activities

14.1.1 Checking the Delivery Content

Check the machine immediately after receipt of delivery or after unpacking for transport damage
or missing or damaged parts.
Note any visible transport damage immediately on the delivery note and report any damage to
the machine or missing parts immediately to your retailer or freight forwarder.

14.1.2 Working place

The floor at the installation site must be able to support the weight of the machine. The minimum
space required for the machine is determined by the dimensions of the machine plus a safety
area of approx. 80 cm around the machine.
Choose an even, load-bearing subfloor with the appropriate amount of space as the installation
location. The installation site must also meet the ergonomic requirements of a workplace.

14.1.3 Electrical Connection

Working on an unearthed machine can result in serious injury or even death. Ground
the machine and operate it only from a grounded outlet! Operation is only permitted
with a residual current protective device (RCD with maximum residual current of 30
mA). Only use suitable extension cables with the appropriate stranded wire cross-
section (see table below).!
Check the running direction of the motor immediately after making the electrical
connection!
HOLZMANN MASCHINEN GmbH
W A R N I N G
W A R N I N G
N O T E
www.holzmann-maschinen.at
If possible, use a lift truck or stacker to
transport the delivered product to the desired
location before unpacking.
TRANSPORT
23
SB163VH