Special Safety Instructions; Hazard Warnings - HOLZMANN-MASCHINEN SB 163VH Betriebsanleitung

12.6 Special Safety Instructions

 Work with gloves on rotating parts is not permitted!
 Secure the workpiece to be machined against entrainment by the drill. Use a machine vice
or clamping claws for clamping.

12.7 Hazard Warnings

Despite their intended use, certain residual risks remain. Due to the design and construction of
the machine, hazardous situations may occur when handling the machines, which are identified
as follows in these operating instructions:
A safety instruction designed in this way indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
Such a safety instruction indicates a potentially hazardous situation which, if not
avoided, may result in serious injury or even death.
A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate injury.
A safety notice designed in this way indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
Irrespective of all safety regulations, your common sense and appropriate technical
suitability/training are and will remain the most important safety factor for error-free operation of
the machine. Safe working depends primarily on you!
HOLZMANN MASCHINEN GmbH
D A N G E R
W A R N I N G
C A U T I O N
N O T E
www.holzmann-maschinen.at
SAFETY
22
SB163VH