Fault
Displays do not
illuminate.
E1" is displayed,
Fig. 2/5.
Customer service
Please check your telephone book or the
customer service list for your nearest
customer service facility. When
contacting customer service, please
ALWAYS quote the product number
(E number) and production number
(FD number) of your appliance.
Possible cause
Power failure!
S The fuse has
tripped.
S The mains plug has
not been inserted
properly.
The electronics
module is signalling
a fault.
Remedial action
Check whether the power is on,
the fuse must be switched on.
Call customer service.
These numbers can be found on the
rating plate. Fig. w
To prevent unnecessary call outs, please
assist customer service by quoting the
product and production numbers. This
will save you additional costs.
en
23