Acson international IM-WM1-0302-ACSON Installationsanleitung Seite 8

B. Outdoor unit orifice pipe installation (where installation space is limited)
If the orifice pipe cannot be connected directly to the liquid valve due to space constraint, it can be connected in between of the
liquid pipe.
Steps:
1. Flare the liquid pipe and connect it to the liquid valve.
2. Braze an additional "Male" joint to the liquid pipe.
Liquid Pipe
C. Indoor unit orifice pipe installation
Steps:
1. Braze an additional "Male" joint
to the liquid pipe.
Liquid Pipe
Brazer
3. Connect the "Female" nut of the Orifice pipe to
4. Flare another liquid pipe and connect it to the "Male"
Brazer
Indoor Unit
2. Connect the "Female" nut of the
Orifice pipe to the"Male" joint.
Liquid Pipe
1-5
Step 4
Orifice Pipe
Step 3
Step 2
Step 1
the"Male" joint.
Liquid Pipe
joint of the orifice pipe.
Liquid Pipe
Orifice Pipe
Orifice Pipe
3. Flare another liquid pipe and
connect it to the "Male" joint
of the orifice pipe.
Orifice Pipe
Liquid Pipe
Orifice Pipe
Orifice Pipe