Aux-In - auna 10032295 Bedienungsanleitung

Snooze
Press the Snooze (6) once to extend the alarm for 9 minutes every time and
the AL icon on the LCD display will be flashing.
Sleep setting
1. Press the SLEEP button to enable the sleep function.
2. Keep pressing the button to adjust the sleep timer in the sequence of
10 > 20 > 30....90 minutes.
3. The system will stop and automatically go into Standby Mode after the
selected time has passed.
4. To cancel the Sleep mode, press the SLEEP button until it reaches the "
00 " mode.

AUX-IN

This unit provides an auxiliary audio signal input jack for connecting
external audio devices like MP3 players, CD players, so you can listen to
your external source through the speakers of this system.
1. Use an audio cable (not included) with one 3.5 mm stereo plug on each
end of the cable.
2. Plug one end into the Aux-in jack (19) on the main unit and the other end
of the cable into the Line-out Jack or Headphone Jack of your external
audio device. It will automatically switch the unit to AUX mode.
3. Switch on the unit by pressing the On/Standby button (2), then press
Function button (8) to select " AUX " mode.
4. The volume level can now be controlled through the main unit. Operate
all other functions on the auxiliary device as usual.
Note: If the Line Out Jack of your external device is connected, then you
only need to adjust the volume control of this system. If the Headphone
Jack of your external device is connected, then you may need to adjust
both the volume control of your external device and the volume control
of this system to find the most desirable volume setting.
EN
31