Display - Siemens CT636LE Serie Gebrauchsanleitung

Switch off appliance
● Press the I button�
The appliance rinses and switches to
energy saving mode�
Exception: If only hot water is dispensed,
the appliance switches off without rinsing �
● To switch the appliance off completely,
open the appliance door and set the
mains switch to h�
Important: Do not press the mains
F
switch while the appliance is in use�
Switch off the appliance only when
it is in energy saving mode, so it can
rinse automatically�
F The factory settings of the fully
automatic coffee machine are
programmed for optimal perfor-
mance� The appliances switches
automatically to the energy saving
mode after a configured time and
rinses (duration can be set, see
"Switch off after" in the section
"Menu")�
F The appliance is equipped with a
sensor� If there is a milk container,
this will be correspondingly shown
on the display when switching to the
energy saving mode� If there is milk
in the container, please keep in the
fridge�

Display

Information is shown on the display, or
settings can be made by touching the
touchscreen�
Display
The display shows the selected drinks,
settings and setting options, as well as
messages about the appliance's operating
status�
Examples:
Drink selection
Espresso
Y Y Y
Information
Information disappears after pressing the
button or after a short time�
Water tank almost empty
Instead of text, a small symbol appears in
the lower left area of the display�
a
Bean container almost empty
b Water tank almost empty
c
Change water filter
d Cleaning programme required
e
Descaling programme required
f
calc'nClean programme required
en
40 ml
Adjust
39