Medtronic MINILINK REAL-Time Bedienungsanleitung Seite 4

Do not use the MiniLink to send glucose readings to the monitor while
onboard an aircraft. Disconnect the MiniLink from the sensor while travelling
on an aircraft or if interference with other transmitting devices occurs.
The sensor should be removed if redness, bleeding, pain, tenderness,
irritation, or inflammation develops at insertion site, or if you experience
unexplained fever.
An optional occlusive dressing should be removed if irritation or reaction to
the tape develops.
The sensor may create special needs regarding your medical conditions or
medications. Discuss with your doctor before using the sensor.
Wait 5 minutes after sensor insertion before connecting the transmitter to the
sensor.
• Make sure that the site is not bleeding before connection.
• If bleeding occurs, apply steady pressure with a sterile gauze or clean
cloth at the insertion site until bleeding stops. After bleeding stops, attach
the MiniLink to the sensor.
• If bleeding persists after 3 minutes, remove the sensor and discard.
Insert a new sensor in a different location.
Contact the HelpLine or your local representative listed on the enclosed
International Contact card if you experience any adverse reactions
associated with the MiniLink or sensor.
Note: The MiniLink is designed to withstand common electromagnetic
interference, including airport security systems.
Precautions
Establish a rotation schedule for choosing new sensor sites. Avoid sites
that are constrained by clothing, have scar tissue, or are subject to rigorous
movement during exercise.
FCC notice
This device complies with the United States Federal Communications
Commission (FCC) and international standards for electromagnetic
compatibility.
This device complies with Part 15 Rules. Operation is subject to the following
- 2 -