Remote Control - Velleman MONCOLHA7PN2 Anleitung

6. TIME button To use the sleep function. Press to select 120 – 90 – 60 – 30 – OFF – 120... The device will
turn off automatically after the selected period.
7. MODE button Sets an aspect ratio of 16:9 or 4:3.
8. Power indicator Lights when the device is activated.
9. IR Window This window conceals a sensor that receives the signals of the remote control.
10. TFT LCD
11. Connector Input jack.

5. Remote Control

1. Mute button
2. Standby button
3. AV button
4. Volume ↓ button
5. Volume ↑ button
6. Colour saturation ↓
7. Colour saturation ↑
8. Contrast ↓ button
9. Contrast ↑ button
10. Brightness ↓ button
11. Brightness ↑ button
12. L/R button (no function)
13. U/D button (no function)
14. MODE button
6. Safety
• This monitor uses a DC power supply, so mind the polarity and make sure that the regulated supply's voltage lies
between 11 – 14V in order to avoid damage to the parts.
• This TFT LCD monitor is a very sensitive device. Do not shake it and do not strike it. Use the device at a
temperature between 5 and 40°C. Make sure no metal objects penetrate the housing and protect the device
against water. Avoid short circuits as they can damage the monitors.
• You can suffer an electroshock if you try to repair the device yourself. Have a professional repair this device if
necessary.
7. Accessories
• 1 remote control
• 1 cable acts as power cable / video cable / audio cable
• 1 user manual
MONCOLHA7PN2
Press this button to turn the audio on/off in case the monitor has a built-in speaker.
Press this button to put the monitor in standby mode and press again to restore
normal operation. Power consumption is minimal in the standby mode.
Used to switch between A/V inputs 1 & 2. AV1 is exclusively audio, AV2 is
audio/video.
Press this button to lower the volume.
Press this button to increase the volume.
Press this button to decrease the colour
saturation.
Press this button to increase the colour
saturation.
Press this button to lower the contrast.
Press this button to heighten the contrast.
Press this button to decrease the
brightness.
Press this button to increase the brightness
of the picture.
To reverse the image (left/right) (mirror
function)
To reverse the image (up/down)
To select an aspect ratio of 16:9 or 4:3.
2 VELLEMAN