Velleman MONCOLHA7PN Bedienungsanleitung

MONCOLHA7PN – 7" TFT LCD 16/9 Monitor with Remote Control
1. Introduction
Thank you for buying the MONCOLHA7PN. We advise you to read this manual before you bring the device into
service.
This is a light CRT monitor with low radiation and no distortion. Power consumption is minimal and the construction
materials are nature-friendly. This 7" TFT LCD monitor uses a DSP chip and offers a clear picture and true colours.
2. Features
• IR remote control
• OSD display
• setting mode with automating store function
• automatic recognition of NTSC/PAL signal guarantees a clear picture
3. Specifications
Screen Size
Display Format
Effective Display Dimensions
System
Video Input
Audio Input
Power Supply
Current
Power Consumption
Operating Temperature
Storage Temperature
4. Front Panel Description
1. Power switch Press this button to
activate/deactivate the monitor. The
indicator (8) lights to indicate that
the device has been turned on.
2. "+" button Press this button to successively
increase the values set for
brightness, colour saturation,
contrast, hue and volume.
3. SEL button Used to select one of the controls in
the following order : brightness –
colour saturation – contrast – hue –
volume. Use button 2 or 4 to adjust
the selected value. Note that you
can only adjust the hue in the NTSC system.
4. "-" button Press this button to successively lower the values set for brightness, colour saturation,
contrast, hue and volume.
5. AV button Select the signal source with this button : video input 1 or 2.
MONCOLHA7PN
7" (diagonal)
1440 (RGB) (H) x 234 (V) = 336960 pixels
154.1 x 85.5mm
NTSC/PAL (automatic recognition)
1.0Vp-p (75Ω)
-10dB (10kΩ)
DC11V-14V
≤ 800mA
≤ 10W
5 to 40°C
-10 to +80°C
1 VELLEMAN