Remote Control - Velleman MONCOLHA7PN2 Anleitung

5. Remote Control

1. Mute button Turn the audio on/off.
2. SLEEP Press to select OFF/15/30/45/60/75/90/105/
120/OFF... The device will turn off automatically
after the selected period
3. Brightness ↑ Increase the brightness of the picture.
4. Contrast ↑ Increase the contrast.
5. Contrast ↓
Decrease the contrast.
6. Brightness ↓ Decrease the brightness.
7. Volume ↑ Increase the volume.
8. Tint ↑ Increase the tint.
9. Tint ↓ Decrease the tint.
10. Volume ↓ Decrease the volume.
11. AV Switch between video1 (audio + video)& video2
(video only).
12. Standby button Put the monitor in standby mode or restore
normal operation. Power consumption is minimal
in the standby mode.
13. Colour ↑ Increase the colour saturation.
14. Colour ↓ Decrease the colour saturation.
15. MODE To select an aspect ratio of 16:9 or 4:3.
16. PP Picture Preference: Standard / Soft / Vivid / Light / Memory.
17. SYS Image is: 1-rotated 180° ; 2-mirrored ; 3-flipped (=180°+mirrored) ; 4-normal.
6. Safety
• This monitor uses a DC power supply, so mind the polarity and make sure that the regulated supply's voltage lies
between 11 – 14V in order to avoid damage to the parts. Recommended adapter: PS1205R (not included).
• This TFT LCD monitor is a very sensitive device. Do not shake or strike it. Use the device at a temperature
between 5 and 40°C. Make sure no metal objects penetrate the housing and protect the device against water.
Avoid short circuits as they can damage the monitors.
• You can suffer an electroshock if you try to open the device. Have a professional repair this device if necessary.
7. Accessories
• 1 remote control
• 1 cable (power + video + audio)
• 1 user manual
8. Wiring Diagram
(see fig. 3)
1 video input 2
2. fuse 2A
3. video input 1
4. audio input 1
5. battery
The information in this manual is subject to change without prior notice.
MONCOLHA7PN2 - 2 -
Fig.2
Fig.3
VELLEMAN