MONCOLHA7PN2 – 7" TFT LCD 16/9 Monitor with Remote Control
1. Introduction
Thank you for buying the MONCOLHA7PN2. We advise you to read this manual before you bring the device into
service.
This is a light CRT monitor with low radiation and no distortion. Power consumption is minimal and the construction
materials are nature-friendly. This 7" TFT LCD monitor uses a DSP chip and offers a clear picture and true colours.
2. Features
• IR remote control
• OSD display
• setting mode with automating store function
• automatic recognition of NTSC/PAL signal guarantees a clear picture
3. Specifications
Screen Size
Display Format
Effective Display Dimensions
System
Video Input
Audio Input
Power Supply
Current
Power Consumption
Operating Temperature
Storage Temperature
4. Front Panel Description
1. Power switch
Press this button to
activate/deactivate the monitor. The
indicator (8) lights to indicate that
the device has been turned on.
2. "+" button
Press this button to successively
increase the values set for
brightness, colour saturation,
contrast, hue and volume.
3. SEL button
Used to select one of the controls in
the following order : volume -
brightness – contrast – saturation –
hue – mode select 16:9 – mode
select 4:3 – source input – AV
inverse (no function). Use button 2 or 4 to adjust the selected value. Note that you can only
adjust the hue in the NTSC system.
4. "-" button
Press this button to successively lower the values set for brightness, colour saturation,
contrast, hue and volume.
5. AV button
Select the signal source with this button : video input 1 or 2.
MONCOLHA7PN2
7" (diagonal)
1440 (RGB) (H) x 234 (V) = 336960 pixels
154.1 x 85.5mm
NTSC/PAL (automatic recognition)
1.0Vp-p (75Ω)
-10dB (10kΩ)
DC11V-14V
≤ 800mA
≤ 10W
5 to 40°C
-10 to +80°C
1
VELLEMAN