Tilt Stand; Safety Information - Agilent Technologies U1401A Schnellstart Handbuch

Tilt Stand

The instrument can be raised to a standing position by means
of a tilt stand.

Safety Information

This instrument is safety and EMC certified in
compliance with:
• IEC 61010-1:2001/EN61010-1:2001 (2nd Edition)
• Canada: CAN/CSA-C22.2 No. 61010-1-04
• USA: ANSI/UL 61010-1:2004
• IEC61326-2-1:2005/EN61326-2-1:2006
• Canada: ICES-001:2004
• Australia/New Zealand: AS/NZS CISPR11:2004
Measurement Category II 150 V, Pollution Degree 2.
Use with standard or compatible test probes.
Safety Notices
A CAUTION notice denotes a hazard. It calls
attention to an operating procedure, practice, or the
like that, if not correctly performed or adhered to,
could result in damage to the product or loss of
important data. Do not proceed beyond a CAUTION
notice until the indicated conditions are fully
understood and met.
For further safety information details, refer to the U1401A Handheld Multi- Function
Calibrator/Meter User's and Service Guide.
WA R N I N G
A WARNING notice denotes a hazard. It calls attention
to an operating procedure, practice, or the like that, if
not correctly performed or adhered to, could result in
personal injury or death. Do not proceed beyond a
WARNING notice until the indicated conditions are
fully understood and met.
Safety Symbols
CAT II
Category II 150 V overvoltage protection
150 V
Double insulation
Earth ground
Caution, risk of danger
Caution, risk of electric shock