Attaching The Ceiling Mounting Bracket To The Ceiling; Attaching The Projector Mounting Bracket - Sony PSS-650 Installationshandbuch Fur Handler

Inner pipe
Outer pipe
Tip
The height adjustment range can be increased even
further by using the PSS-650P Projector Suspension
Support Joint Pole (sold separately).
Adjustment range: 650 mm to 2,975 mm (25
1 31
117 / in.) (25 mm ( / in.) adjustment pitch)
8 32
Attaching the Ceiling Mounting
Bracket to the Ceiling
4
Attach the ceiling mounting bracket to the ceiling.
Use commercially available M10 anchor bolts,
washers, and nuts (4 locations). These parts are to
be supplied by the customer.
The anchor bolts should protrude through the
attachment surface of the ceiling mounting bracket
by 34 mm to 36 mm (1
19
/ in. to
32
11 13
/ in. to 1 / in.).
32 32
For details, see "Typical Ceiling Attachment"
(page 28).
M10 bolt
Lens side
Note
Attach the ceiling mounting bracket and adjustment
bracket so that the attached "LENS SIDE" labels are
facing the lens side.
Attaching the Projector Mounting
Bracket
5
Turn the projector upside down, and attach the
projector mounting bracket (C).
Tighten the three BSW 5×12 screws (d), in the
order 1 to 3.
3
(d)
1
(d)
2
34 mm to 36 mm
11
(1 / in. to
32
13
1 / in.)
32
(B)
Washer
Nuts
Labels
(d)
(C)
Attaching to the Ceiling
23