Cameo TS 200 FC Bedienungsanleitung Seite 8

STAND-ALONE MODE COLOR MACROS (Macro)
Stand-alone mode for selecting a color preset (Color), for setting the brightness (Dimmer), and the stroboscope (Speed). You can access the
options menu by pressing MENU. Using the UP and DOWN buttons, now select the "Mode" menu item (bottom row) and confirm via ENTER.
Afterwards, select the "Macro" menu item by using the UP and DOWN buttons again. Confirm with ENTER. Now use UP and DOWN to select
the submenu item you'd like to edit and then press ENTER. Set the desired value by pressing UP and DOWN (hold down to quickly change
values) and confirm via ENTER. The values for setting the stroboscopic function correspond to the values of the multifunctional stroboscope
in channel 3 of the 12- and 14-channel DMX mode. Press MENU again to return to the main screen. If there is no input within approx. 30
seconds, the main screen is automatically activated. If the main screen is activated, the overall brightness (dimmer) can now be set directly
(UP and DOWN buttons).
Fifteen color macros are available:
Macro
Red Turquoise
Amber Cyan
Yellow Warm Blue
Yellow Lavender
Green Mauve
STAND-ALONE MODE HSI (Hue saturation intensity)
Stand-alone mode for setting the hue (Hue), color saturation (Saturation), brightness (Intensity), and stroboscope (Strobe). You can access
the options menu by pressing MENU. Using the UP and DOWN buttons, now select the "Mode" menu item (bottom row) and confirm via
ENTER. Afterwards, select the "HSI" menu item by using the UP and DOWN buttons again. Confirm with ENTER. Now use UP and DOWN to
select the submenu item you'd like to edit and then press ENTER. Set the desired value by pressing UP and DOWN (hold down to quickly
change values) and confirm via ENTER. The values for setting the stroboscopic function correspond to the values of the multifunctional
stroboscope in channel 3 of the 12- and 14-channel DMX mode. Press MENU again to return to the main screen. If there is no input within
approx. 30 seconds, the main screen is automatically activated. If the main screen is activated, the overall brightness (intensity) can now be
set directly (UP and DOWN buttons).
STAND-ALONE MODE CCT (Correlated Color Temperature)
Stand-alone mode for setting the color temperature (Temperature), tint (Tint), brightness (Dimmer), and stroboscope (Strobe). You can
access the options menu by pressing MENU. Using the UP and DOWN buttons, now select the "Mode" menu item (bottom row) and confirm
via ENTER. Afterwards, select the "HSI" menu item by using the UP and DOWN buttons again. Confirm with ENTER. Now use UP and DOWN
to select the submenu item you'd like to edit and then press ENTER. Set the desired value by pressing UP and DOWN (hold down to quickly
change values) and confirm via ENTER. The values for setting the stroboscopic function correspond to the values of the multifunctional
stroboscope in channel 3 of the 12- and 14-channel DMX mode. Press MENU again to return to the main screen. If there is no input within
approx. 30 seconds, the main screen is automatically activated. If the main screen is activated, the overall brightness (dimmer) can now be
set directly (UP and DOWN buttons).
8
Magenta
Pink
Warm White
White
Cold White