Extremis MARINA TABLE Montageanleitung Seite 5

4. Insert the tabletop end piece with the lips into the slots
from left to right. Fasten them using 5/6 M5 x 12
countersunk bolts. Repeat this operation on the other
side, this time from right to left.
6. Turn over the table. Level the table by screwing the
adjustable feet in or out and fasten the feet by turning
the nu until it sits against the leg.
5. Now fasten the table leg assembly with the tabletop
connection to the profiles, each time at the intended
place, using 10/12 M6x20 hexagon socket bolts +
reinforcement profiles (also use 10/12 M6x20 hexagon
socket bolts). Remove the spacers.
english 5