ASSEMBLY MARINA TABLE
WHAT YOU NEED
min. 2 people
no. 10 - 17 spanner
no. 3 - 4 hex key
+/- 45 min. (depending
on the length of the
table)
2. Now screw the adjustable feet into the legs. Repeat step
1 through 2 for each table leg assembly and put them
aside.
4
assembly marina (high) table
1. Insert the table legs into the tabletop connection, aligning the 3 holes, and
use 12 M6x16 hexagon socket bolts and 12 lock nuts to fasten them. First
push all the bolt shafts through the holes and make sure that the bolts are
on the outside. Then thread the nuts onto the shafts of the bolts and tighten
them firmly.
3. Put the 5/6 tabletop profiles on the floor, with the slots
facing upwards, and make sure that the crosses are
facing the same way. Insert a spacer between each
profile at +/- 40 cm from the end.