Symbol LS 2200 Serie Kurzübersicht Seite 67

Q u i c k
Programming Bar Codes
Following are some frequently used programming bar
codes.
Note: For additional host types, refer to the LS 2200/
2208 Product Reference Guide, p/n 72-
58808-xx, available on the LS 2200/2208 CD,
or on the Symbol Web site,
http://www.symbol.com/manuals.
Set Defaults
Scanning this bar code sets all parameters to their
default values
Host Type
If you are using a Synapse cable (i.e., part number
STIxx-xxxx), the scanner autodetects the Synapse
cable you are using, so you do not need to scan bar
codes to enable the synapse host.
R e f e r e n c e
.
SET DEFAULTS
65