Playing The Demo Songs; Auto Song Setup - Korg microSTATION Schnellstart

Easy Start Guide

Playing the demo songs

1
1.
Press the SEQ button to enter Sequencer mode.
2.
Press the START/STOP (/
To stop playback mid‐way through the song, press the START/STOP button once again.
3.
To listen to another song, use the  buttons to select the song
and then press the START/STOP button.

Auto song setup

When you're playing a combination or program, you can copy its settings to Sequencer mode as song data, so that
you're ready to start recording. This function is called "Auto Song Setup." You can use this function to immediately
start recording the moment you have an idea or inspiration while playing a program or combination.
1.
Select the combination or program that you want to use for recording.
Also check the arpeggiator's on/off status.
2.
Press the REC button.
The display will ask "Auto Song Setup OK?"
3.
Press the  button.
The microSTATION will switch to Sequencer mode, and will
automatically be in the record‐ready state.
The upper right side of the display shows the location, and the
lower line shows the song name (initially this will be NEW
SONG).
4.
Press the START/STOP (/) button. After a two‐measure count, recording will begin. Go ahead and play.
18
2

) button to start playback.
2
4, 5
3
3