Operation Of The Appliance; Switching The Appliance On And Off; Switching The Cooking-Zones On And Off - VESTEL SCHOTT CERAN VEA25016 Installations- Und Bedienungsanleitung

OPERATION OF THE APPLIANCE

Use the induction cooking zones with suitable cookware.
After mains voltage is applied, all displays are come on for a moment. When this time is over, the
hob is in the stand-by mode and it is ready for operation.
The hob is controlled with electronic sensors which are operated by touching the related sensors.
Each sensor activation is followed by a sound signal (buzzer).
Switching the appliance on:
Switch the hob on by touching ON/OFF key . All heater displays show a static "0 " and the
bottom right dots blink. (If no cooking-zone is selected within 20 seconds, the hob will automatically
turn off.)
Switching the appliance off:
Switch the hob off at any time by touching .
ON/OFF key
has always priority in the switch off function.
Switching the cooking-zones on:
Touch the heater selection key you wish to cook on. There is a static dot indication on the selected
heater display and the blinking dot on all other displays extinguish.
Select the temperature setting by using the increase heat setting key or decrease heat setting
key . The element is now ready to cook on. For quickest boil times, select desired cooking
level and then touch the P key to activate Boost function.
Switching the cooking-zones off:
Select the element you want to switch off by pressing the heater selection key. Using key, turn
the temperature down to ''0''. (Also using and keys simultaneously turns the temperature to
''0'')
If the cooking zone is hot, "H" will be displayed instead of "0".
6