Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Using the chronograph
This chronograph is able to measure and display time in 1/1
second united up to maximum of 59 minutes 59 seconds.
The chronograph 1/1 second hand keeps continuously for
59 minutes 59 seconds after starting.
Measuring time with the chronograph
1.
The chronograph can be started and stopped each time
button „A" is pressed.
2.
Pressing button „B" resets the chronograph and the
chronograph second hand and chronograph minute
hand return to zero position.
„A"
Reset
Time measurement
30
„A"
Stop
„A"
„B"
„B"
Chronograph reset
(incl. after replacing the battery)
1.
Pull the crown out to position (2).
2.
Press button „A" to set the chronograph second hand to
zero position. The chronograph hand can be advanced
rapidly by continuously pressing button "A".
3.
Once the hand has been zeroed, return the crown to
normal position (1).
Attention!
Do not push crown to normal position while the chro-
nograph second hand returns to zero position. It stops
on the way when crown has returned to normal position
and its position is recognized as zero position.
31
Werbung
