tbs electronics Expert Modular Bedienerhandbuch Seite 22

MIDPNT 2.0%
(bank1)
V.LOW (bank2) 10.5V
V.HIGH 16.0V
(bank2)
V.LOW (bank3) 10.5V
V.HIGH 16.0V
(bank3)
F5.1 Alarm 1 on value. Activates the alarm when the parameter has reached this value.
Default: see table 10
F5.2 Alarm 1 off value. Deactivates the alarm when the parameter has reached this value.
Default: see table 10
F5.3 Alarm 1 on delay. This is the time the alarm on condition of F5.1 must be met before the
alarm is activated.
Default: 10sec
F5.4 Alarm 1 off delay. This is the time the alarm off condition of F5.2 must be met before the
alarm is deactivated.
Default: 0sec
0.5% 0.0% - 50.0%
11.0V 7.0V - 70.0V
15.5V
11.0V 7.0V - 70.0V
15.5V
Range: see table 10
Range: see table 10
Range: 0 – 3600sec
Range: 0 – 3600sec
Midpoint voltage deviation. When the
deviation exceeds the On value, the
associated alarm will be activated. When
the deviation falls below the Off value,
this alarm will be deactivated again. For
more information on midpoint voltage
measurement and setup, please see
appendix 1 in the online version of this
manual, available at
electronics.nl/downloads
Low battery voltage. When the voltage
falls below the On value, the associated
alarm will be activated. When the voltage
rises above the Off value, this alarm will
be deactivated again.
High battery voltage. When the voltage
rises above the On value, the associated
alarm will be activated. When the voltage
falls below the Off value, this alarm will be
deactivated again.
Low battery voltage. When the voltage
falls below the On value, the associated
alarm will be activated. When the voltage
rises above the Off value, this alarm will
be deactivated again.
High battery voltage. When the voltage
rises above the On value, the associated
alarm will be activated. When the voltage
falls below the Off value, this alarm will be
deactivated again.
Step size: variable
Step size: variable
Step size: variable
Step size: variable
22
www.tbs-