tbs electronics Expert Modular Bedienerhandbuch Seite 21

Table 10
Alarm type On value
(default)
OFF -
V.LOW (bank1) 10.5V
V.HIGH 16.0V
(bank1)
SOC.LOW 40%
(bank1)
TIME.LOW 0h30m
(bank1)
I.CHARGE 10.0A
(bank1)
I.DISCH 10.0A
(bank1)
T.LOW (bank1) 0°C
T.HIGH 40°C
(bank1)
Off value Range
(default)
- -
11.0V 7.0V - 70.0V
15.5V
80% 0% - 99%
1h00m 1min – 24hrs
9.0A 1.0A - 600.0A High charge current. When the charge
9.0A
1°C -20°C .. +50°C Low battery temperature. When the
39°C -20°C .. +50°C High battery temperature. When the
Alarm description
Alarm not used
Low battery voltage. When the voltage
falls below the On value, the associated
alarm will be activated. When the voltage
rises above the Off value, this alarms will
be deactivated again.
High battery voltage. When the voltage
rises above the On value, the associated
alarm will be activated. When the voltage
falls below the Off value, this alarm will be
deactivated again.
Low State of Charge. When the SoC falls
below the On value, the associated alarm
will be activated. When the SoC rises
above the Off value, this alarm will be
deactivated again.
Low time remaining. When the time
remaining falls below the On value, the
associated alarm will be activated. When
the time remaining rises above the Off
value, this alarm will be deactivated again.
current exceeds the On value, the
associated alarm will be activated. When
the charge current falls below the Off
value, this alarm will be deactivated again.
High discharge current. When the
discharge current exceeds the On value,
the associated alarm will be activated.
When the charge current falls below the
Off value, this alarm will be deactivated
again.
temperature falls below the On value, the
associated alarm will be activated. When
the temperature rises above the Off value,
this alarm will be deactivated again.
temperature exceeds the On value, the
associated alarm will be activated. When
the temperature falls below the Off value,
this alarm will be deactivated again.
21