Siemens SITRANS LR 200 Kurzanleitung Seite 12

Hand Programmer: key functions in Edit mode
Key
Right arrow:
Press once: accept the data (write the parameter).
Press again: Mode changes from Edit to Navigation.
Left arrow: cancel Edit mode without changing the parameter.
Erase the most recently changed character. If this is the first key in Edit mode, erase the
C
display.
Add a decimal point.
Change the sign of the entered value.
Add the corresponding character.
to
Security
Local operation enable
Local Operation can be enabled or disabled via PDM. Go to Identification > Device > Local
Operation Enable and select the desired setting.
Remote operation enable
Remote Operation can be enabled or disabled via the hand programmer. To change the setting:
• Open Identification Menu, then scroll down to CONFIG.
• Press Right ARROW
1. Identification
1.2. Configuration
1.2.2. Remote Lock
• To enable programming, set REMLOCK to 0. To disable programming, enter 1.
How to do a Master Reset
Open the Device menu in PDM, to access the reset options, including Factory Reset.
Activating SITRANS LR 200
Note:
Keep infrared devices such as laptops, cell phones, and PDAs, away from SITRANS
LR 200 (PROFIBUS PA) to prevent inadvertent operation.
Power up the instrument. SITRANS LR 200 (PROFIBUS PA) starts in RUN mode, and the
LCD displays the output of AIFB1.
Page EN-10 SITRANS LR 200 (PROFIBUS PA) – QUICK START MANUAL
Edit Mode
to open the Config Menu, then scroll down to REMLOCK.
7ML19985QG81