Siemens SITRANS LR 200 Kurzanleitung Seite 10

Programming SITRANS LR 200 (PROFIBUS PA)
The parameters that control the operation of the LR 200 (PROFIBUS PA) are organized into
function groups, and arranged in a 4-level menu structure that can be accessed either via the
hand programmer, or via PDM and PROFIBUS PA. (For charts showing the complete menu
structure, please see the full manual.)
The hand programmer
To activate PROGRAM mode, point the hand programmer at the display (from a maximum
distance of 600 mm/2 ft), and press the Mode key
The hand programmer has two modes of operation:
1. Navigation Mode
• in this mode, the rightmost digit of the menu number flashes (the PROGRAM icon
is not visible)
• up/down arrows change the mode number
• pressing the right/left arrows once moves to the next/previous menu
• pressing the right arrow a second time changes the mode from Navigation to Edit
mode
2. Edit Mode
• in this mode, the PROGRAM icon
• pressing the number keys enters parameter data
• only parameter items can be in edit mode
• in the case of read-only parameters, no change is permitted
1.
For complete instructions on local programming using the hand programmer, please see the full
manual.
Page EN-8 SITRANS LR 200 (PROFIBUS PA) – QUICK START MANUAL
1
appears and flashes
.
7ML19985QG81