Notes To The User; Scope Of Delivery; Qualified Personnel; Languages - Balluff BAM PC-TL-020-K-4 Serie Betriebsanleitung

BAM PC-TL-020-K_ _/KA_ _-4
Connection cover for magnetostrictive linear position sensor
1

Notes to the user

1.1 Validity
This manual describes the construction and function of the
connection housing for BTL magnetostrictive linear
position sensors with PROFIBUS interface. It applies to
models BAM PC-TL-020-K__/KA__-4 together with
BTL7-T...-DEX_-ZA1K (see part number code
on page 13).
The guide is intended for qualified technical personnel.
Read this guide before installing and operating the BTL.
1.2

Scope of delivery

– Connection cover BAM PC-TL-020-...
– User's Guide
– Plastic protection cap
– 3 × Screw M5x55
– 3 × Washer
– O-ring
You can find the declaration of conformity for
your specific device in the download area at
www.balluff.com. Please enter the type
designation or the ordering code in the search
field.
1.3

Qualified personnel

The user's guide is intended for technical personnel who
have the required knowledge of selection, installation and
operation.
1.4

Languages

The original user's guide was written in German. Versions
in other languages are translations of the original user's
guide. The information in the original user's guide will apply
if the contents of the translated versions are not clear or
the information is contradictory.
If no guide exists in the language of the country where the
product will be used, the BTL may not be placed in
service. In such cases please contact Balluff.
4 english
1.5

Symbols and conventions

Individual instructions are indicated by a preceding
triangle.
► Instruction 1
Action sequences are numbered consecutively:
1. Instruction 1
2. Instruction 2
Note, tip
This symbol indicates general notes.
1.6

Explanation of the warnings

Always observe the warnings in these instructions and the
measures described to avoid hazards.
The warnings used here contain various signal words and
are structured as follows:
SIGNAL WORD
Type and source of the hazard
Consequences if not complied with
► Measures to avoid hazards
The individual signal words mean:
NOTICE
Identifies a hazard that could damage or destroy the
product.
DANGER
The general warning symbol in conjunction with the
signal word DANGER identifies a hazard which, if not
avoided, will certainly result in death or serious injury.
1.7

Disposal

► Observe the national regulations for disposal.