Matrix KS 200-1 Bersetzung Der Originalbetriebsanleitung Seite 22

equipped with a residual current circuit-breaker.
Pull the plug when you are not using the device
or making adjustments.
Always guide the cable away from the back of
the tool.
Never cut, drill, or saw in concealed areas where
there may be electric, gas, or water lines. Use a
suitable detector to find such lines.
Never attempt to repair, replace or manipulate
the cable or plug. Always have this work carried
out by trained personnel.
When the machine is working it will generate
dust which may be harmful, inflammable or
explosive.
Take suitable safety precautions. Wear a dust
protection mask. Ensure that there is good
ventilation at the workplace.
Do not machine materials that contain asbestos.
Only use grinding tools whose maximum speed
is at least as high as the idling speed of the
machine.
Do not use damaged, non-round or vibrating
grinding tools.
Do not start the machine at idling speed. Always
switch off the machine at the ON/OFF switch
when you have finished working with it. This will
prevent you starting it in idling speed next time
you switch it on.
Check the direction of rotation. Always hold the
machine so that sparks and dust fly away from
your body.
Never reach into rotating grinding tools.
Always switch off the machine and allow it to
reach a standstill before you put it down.
Repairs may only be carried out by trained
personnel using genuine spare parts.
22
The machine must be placed on a flat, sturdy,
dry and well ventilated surface.
Sparks will be generated when grinding metals.
Ensure that there are no people or inflammable
materials in the vicinity of flying sparks.
Never allow people, particularly children, to
approach to less than 5 metres from the
machine when it is operating.
Do not use the machine in damp or wet areas.
Check the goods for missing parts.
The machine must not be operated by
inexperienced persons or children.
Place the machine on a firm work surface. Check
the screws, nuts and bolts at regular intervals
and tighten them if necessary.
Before use, check the machine for signs of
damage, ensure that all parts function correctly
and check that all screws and bolts are secure.
If the machine does not function correctly pull
the power plug out of the socket immediately.
You should also do this if you hear abnormal
noise coming from the machine, the ON/OFF
button does not work correctly or the power
cable is defective.
Replacement discs must be kept in a dry place
where they cannot suffer any damage from
falling.
Use only FEPA standard discs with a diameter of
100 mm. Other discs can explode or jeopardise
the safety of the operator when stressed.
The disc diameter must not differ from the
normal radius by more than 15 mm. Discs with a
diameter of less than 70 mm must not be used
in any circumstances.
The disc must rotate clockwise as indicated by