Sms Command Table - CAME PXC2-32 Benutzerhandbuch

SMS command table

IN THE
CONTROL UNIT STATUS
Control unit status query,
active scenario, battery,
230Vac network, fuses;
TURNING ON THROUGH
SCENARIO
Scenario start
nn = [01<max scenarios]
SYSTEM DEACTIVATION
Control unit deactivation
DEACTIVATION
SINGLE AREA
Area 'nn' deactivation
nn=[01<max areas]
SYSTEM ACTIVATION
Control unit activation
RADAR
SINGLE AREA
'nn' area activation
nn=[01<max areas]
ENTRANCE STATUS
'nnn' entrance query
nnn = [001<max entrances]
ENTRANCE EXCLUSION
'nnn' entrance temporary
Exclusion/Re-arming
nnn = [001<max entrances]
EXIT STATUS
'nnn' exit query
nnn=[001<max exits]
OUTPUT ACTIVATION
Output activation 'nnn'
nnn=[001<max exits]
EXIT DEACTIVATION
'nnn' exit deactivation
nnn=[001<max exits]
EVENTS
Request last nnn events
nnn=[001<050 max]
REMOTE PHOTO SHOOTING
Request last nnn events
nnn=[001<050 max]
COMMAND
desc.CRSMS.654321.9000.
desc.CRSMS.654321.90nn.
desc.CRSMS.654321.0000.
desc.CRSMS.654321.00nn.
desc.CRSMS.654321.1000.
desc.CRSMS.654321.10nn.
desc.CRSMS.654321.2nnn.
desc.CRSMS.654321.3nnn.
desc.CRSMS.654321.4nnn.
desc.CRSMS.654321.6nnn.
desc.CRSMS.654321.5nnn.
desc.CRSMS.654321.8nnn.
desc.CRSMS.654321.7nnn.
Example of an SMS reply:
Control unit 1#2X3#4U5#6#7#8#9#10#11#12#13#14#15#16#, Going out,
Battery Fault, Network Present, Fuses OK
Or:
Control unit 1-2-3-4-5-6-7-8-9-10-11-12-13-14-15-16-,, Battery Ok, Network Absent,
Faulty Fuses
Where:
= armed area
1#
= disarmed area
1-
= area in arming status (exit time)
1U
= area in arming status with open entrances
1X
See CONTROL UNIT STATUS function response
See CONTROL UNIT STATUS function response
See CONTROL UNIT STATUS function response
See CONTROL UNIT STATUS function response
See CONTROL UNIT STATUS function response
Possible SMS reply:
'Entrance Description' Excluded
'Entrance Description' Stand-by Armed
'Entrance Description' In alarm armed
'Entrance Description' In stand-by excluded until the next arming
'Entrance Description' In alarm excluded until the next arming
See ENTRANCE STATUS function response
Attention: with the same command it is possible to exclude or re-arm the
entrance.
SMS reply:
'Exit Description' nnn exit active
Or:
'Exit Description' nnn exit not active
SMS reply:
'Exit Description' nnn exit active
Warning: enable the "Remote command" field associated with the exit.
SMS reply:
'Exit Description' nnn exit not active
Warning: enable the "Remote command" field associated with the exit.
Example of an SMS reply:
EVENT No. 001 TURN ON 23:15:26 10/02/09 1#2#3#4#5#6#7#8#
EVENT No. 002 CODE No.001 23:15:17 10/02/09 USER 001
To respond to the request, the events will be sent in multiple messages,
each containing a maximum of 2 events.
Warning: it is recommended to use this command with moderation to
avoid using the dialler SIM card credit.
SMS reply:
Photo request performed wait ....
REPLY