Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Turning on through scenarios
The areas are turned on by starting up scenarios. Scenarios are as-
sociated with the buttons (A), (B), (C).
The Installer is responsible to instruct the User on the sce-
narios that can be managed by the keypads (each keypad could also
have different scenarios).
Turning on without open entrances
To start a turn on scenario it is necessary to:
1.
Enter the User Code on the keypad (it is not necessary only if the
buttons
((A), (B), (C)
are enabled for quick start without
2.
Select the scenario to be started pressing one of the buttons
(A), (B), (C).
3.
If the scenario is not among the first three scroll with
and select the desired scenario.
4.
If the scenario has open entrances, the list of open entrances
will scroll on the second line of the display (in this case see the
chapter TURNING ON WITH OPEN ENTRANCES).
5.
Press
(A)
to starrt the selected scenario.
6.
The keypad will emit a continuous sound during the exit time.
The areas being turned on are marked with the letter
7.
To force the areas to turn on by cancelling the exit time, press
again (A).
8.
When the turning on is completed the keypad will stop sounding
and the areas turned on will be marked with the
At the end of the exit time, the keypad can be presented in two ways:
•
All areas on:
with LED
######
•
Some areas on:
####--
08:23
16/05/2010
ENTER THE CODE
WAITING FOR COMMAND
*=USER MENU
A=START C,D=CHOOSE
08:24
####--
Turning on with open entrances
In normal operation, it may happen to start an arming scenario with
open entrances (entrance door, dormer window, tilting door, ...). Of
these entrances there are some that will close automatically during
the exit time (entrance door, tilting door), while others (dormer win-
dow) will remain open preventing the arming of the associated area.
In the start-up procedure of a scenario, before confirming the start-
up, the open entrances are displayed giving the possibility to tempo-
rarily exclude only the desired ones.
Each area has its own exit time independent of the others. Each
area time starts only when the last open entrance associated with
the area is closed. Unless it is planned to turn on an area in forced
mode (expiry of the exit time independent of the presence of open
entrances), if going out with an entrance open, the associated area
will never be armed.
If the code entered does not manage some areas of the scenario
they will not be turned on.
character.
#
steady on.
with flashing LED
.
(A)/(B)/(C)
GOING OUT
(A)
GOING OUT
UUUU--
16/05/2010
If in the
SPECIAL FUNCTIONS
has been enabled, in the case of existing anomalies in the system (no
telephone line, no communication with at least one device in the sy-
stem, etc.) the keypad will display
(#)
button will abort the system arming; pressing instead the
ton the arming will be executed anyway, memorizing the successful
forcing in the events memory.
If the code is not entered within 60 seconds, the control unit will
register it as a false code. After entering an incomplete or incorrect
code 5 times, the keypad will be inhibited for 90 seconds. If 20 in-
complete or incorrect codes are entered consecutively (4 groups of
code).
5 codes with 90 second pauses between them) the control unit will
generate a tamper alarm.
To start a turn on scenario with open entrances it is necessary to:
(
)/(
)
▲
▼
1.
Enter the User Code on the keypad (necessary if the buttons
(A), (B),
(C)
2. Select the scenario to be started pressing one of the buttons
(A), (B), (C).
3. If the scenario is not among the first three scroll with
select the desired scenario.
4. If the scenario to be started has open entrances, the list of open
.
U
entrances will appear on the second line of the display (E.g.
KITCHEN WINDOW
5. To temporarily exclude an entrance, it is necessary to:
a. Press
right of the first line
is open;
is excluded.
(*)
b. With
c. With
inputs.
d. Press
6. Press the button
is started, the areas in this status will be marked with the letter
and the keypad will emit a continuous sound. To force the areas
to turn on by cancelling the exit time, press again (A).
7.
If there were other entrances open (e.g. entrance door) the areas
to which they belong will be marked with the letter
keypad will emit an intermittent sound. The areas in question
will never be armed if the entrances still open will not be exclu-
ded.
8. To exclude those still open, press button
EXCLUDE ENTRANCES ?
time start is confirmed by temporarily excluding all the open en-
trances (
(*)).
9. When the turning on is completed the keypad will stop sounding
and the areas turned on will be marked with the
while the area with the excluded entrance will be marked with
At the end of the exit time, the keypad can be presented in two ways:
•
All areas on:
•
Some areas on:
of the technical menu the
DO YOU WANT TO PROCEED?
are not enabled for quick start without code).
) and they will be displayed cyclically.
(*)
when the open entrance is displayed. If to the
appears it means that the entrance
AL.
if the entrance is closed and
OK
the open entrance can be excluded or re-included.
(
)/(
)
it is possible to display the status of the other
▲
▼
(#)
to return to the scenario.
(A)
to start the selected scenario. The exit time
message will be displayed. With
always check the open entrances before pressing
with flashing led
#P####
with flashing LED
#P##--
PRE-ARMING TEST
. Pressing the
(*)
but-
(
)/(
)
and
▲
▼
if the entrance
ES.
U
and the
X
(A)
and the
(*)
the exit
character,
#
.
P
.
.
Werbung
Kapitel
Inhaltsverzeichnis
