Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CODES DESCRIPTION CHANGE
To change the description of a code it is necessary to:
1.
Enter the User Menu.
(
)/(
)
2.
With
select
MANAGMENT 06 OTHER CODES
▲
▼
(
)/(
)
3.
With
select the code to be changed (
▲
▼
code index; the symbol
indicates that the code is disabled) and press (*).
4.
With
(
)/(
)
select
DESCRIPTION
▲
▼
5.
Use the alphanumeric buttons to change the text.
6.
Press
(*)
to confirm or
(#)
Press (#)to exit and return to the previous menus.
7.
MANAGEMENT
USER CODE
CODE XXX
CODE DESCRIPTION
CODE PROPERTIES DISPLAYING
To display the User Code properties it is necessary to:
1.
Enter the User Menu.
2.
With
(
)/(
)
select
MANAGMENT 06 OTHER CODES
▲
▼
(
)/(
)
3.
With
select the code to be displayed(
▲
▼
code index; the symbol
indicates that the code is disabled) and press (*).
Transponder keys
The transponder key is the access key for managing the system through a transponder reader. The transponder key reader is also present on
the keypads. It does not contain batteries and must have been previously configured by the installer to operate.
Key verification
If you have a key whose origin is unknown, you can check its owner
through the User Menu. All system keys are identified by the con-
trol unit using a unique code and a description that can be viewed
through the keypad display.
Do not leave the transponder keys unattended, in case of loss
contact your Installer immediately.
Key identification
To identify a key you it is necessary to:
1.
Enter the User Menu.
(
)/(
)
2.
With
select
KEYS
▲
▼
3.
With
(
)/(
)
select
KEY CHECK
▲
▼
and press (*).
indicates the
XXX
indicates that the code is enabled,
[#]
and press (*).
to cancel.
06
[*]
CODE 1
(*) CHANGE START
CONFIRM
CODE 1
CODE
(*) CHANGE CONFIRMATION
*****
CODE 1
(#) EXIT WITHOUT
CONFIRMING
THE CHANGES
and press (*).
indicates the
XXX
indicates that the code is enabled,
[#]
and press (*).
07
and press (*).
4.
With
(
)/(
)
select
▲
▼
(
)/(
)
5.
With
scroll through the code properties.
▲
▼
a.
ASSOC. AREAS
managed by the code. With
(associated), with
b.
AUTHORIZAT.
[-]
associated areas:
i.
LOCAL ACCESS
ii.
REMOTE ACCESS
Touch.
iii.
AREAS TURNING ON
iv.
AREAS TURN OFF
v.
AREAS MANAGEMENT
system as set in the permissions
the patrol function
6.
Press (#)to exit and return to the previous menus.
MANAGEMENT
[-]
4.
Put the key close to the active keypad reader
.
SEARCH IN PROGRESS
5.
The display shows the key Index and description. If it is not of
the system, the message
Press (#)to exit and return to the previous menus.
6.
KEYS
VALID KEY
NON-ASSOCIATED KEY
and press (*).
PROPERTIES
indicates which areas of the system can be
(#)
the area is managed
(-)
the area is not managed.
indicates the code permissions on the
--> code valid from local keypad.
--> Via home automation App or
--> can only turn on areas
--> can only turn off
-->
TOTAL CONTROL
06
OTHER CODES
PROPERTIES
ASSOCIATED AREAS
PROPERTIES
PERM. ACTIONS
LOCAL ACCESS
PERMITTED
REMOTE ACCESS
PERMITTED
AREAS TURN ON
PERMITTED
AREAS TURN OFF
PERMITTED
AREAS MANAGEMENT
TOT CONTROL
appears.
INVALID KEY
07
CHECK
KEY
PUT KEY CLOSE
TO THE READER
KEY n
KEY NOT KNOWN
manages the
activates
PATROL
KEY READ
Werbung
Kapitel
Inhaltsverzeichnis
