General Features; Description For Use; Security; Symbols And Glossary - CAME PXC2-32 Benutzerhandbuch

General features

Description for use

The security alarm control unit PXC2 (PXC2-32, PXC2-64, PXC2-
212) is designed to enhance security in both homes and service-
sector businesses.
Any installation and/or use other than that specified in this
manual is forbidden.

Security

If properly planned, the security system guarantees a high level of
safety to the buildings where it is to be used.
To ensure this, certain rules must be followed:
Avoid disclosing access codes to outsiders.
Do not use simple or easy to understand codes (dates of birth,
...); all the control units are produced with the default code "123456",
make sure that this code has been disabled. Do not leave the keys of
the system unattended.

Alarm system

The security alarm system is a system composed of devices (key-
pads, sirens, keys, sensors, ...) designed to increase the degree of
environmental protection and to initiate the deterrence (sirens) and
communication (telephone calls, SMS, surveillance centers, ...) ac-
tions in case of need.
The Installer is responsible for instructing the User about the
operation of the security system, about the division of the areas and
their use and coverage, about the function and use of the scenarios.
Also make sure that the installer has filled out the system
technical sheet at the end of this manual.

Areas and entrances

The subdivision of the system into areas and of the areas into en-
trances, has the purpose of simplifying to the User the management
of the system turning on and facilitating the identification of any
break-ins.
SYSTEM
(home)
The system is the envi-
ronment to be protected
and is divided into areas.
AREA
(bedrooms)
The area is a partition
of the system and is
composed of entrances.
ENTRANCE
(detector)
The entrance is the device that
allows the identification of the
break-in.
In case of anomalies or false alarms, immediately contact your
Installer. The maintenance of the system must be carried out by qua-
lified and trusted personnel (Installer); do not try to tamper with parts
of the system, in addition to risk of compromising its operation, there
is the risk of accessing dangerous live electrical parts.

Symbols and glossary

This symbol indicates which parts describe safety issues.
This symbol indicates which parts to read carefully.
Warning light off.
Permanently on warning light.
Flashing warning light.
Rapidly flashing warning light.
Slowly flashing warning light.
INSTALLER: any person/company responsible for planning, installing
and programming the security system.
USER: any person using the security alarm system.

Control unit

The security alarm control unit is the heart of the system and is clear
of acoustic and light signals. All information and activities are availa-
ble and can be managed through the keypad.
The control unit is equipped with safety tamper, the control unit
opening causes the alarm signal.
The control unit and the battery maintenance must be carried
out by qualified personnel.
Battery