Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
To consult the status, activate or deactivate the output it is necessary
to:
1.
Access the voice guide by telephone call and code recognition.
(5)
2.
Press the button
to access the
(2)/(5)
3.
With the buttons
the output status).
(1)
a.
Press the button
b.
Press the button
(0)
4.
Press the button
(9)
to return to the previous menu.
Advanced menu
In advanced menu it is possible to:
•
Query the status of all the entrances entering the entrance
number.
•
Query and command the exits status entering the exit
number.
ENTRANCES QUERY
To query the status of all the entrances directly entering the entrance
number it is necessary to:
1.
Access the voice guide by telephone call and code recognition.
(6)
2.
Press the button
to access the
3.
Press the button
(1)
to access the
4.
Enter the number of the output and press
5.
The play of the entrance description and its status (
or
).
alarm
tampered
6.
With the buttons
(2)/(5)
vious input.
(9)
7.
Press the button
to return to the previous menu.
EXITS QUERY AND COMMAND
To query or command the exits status directly entering the exit num-
ber, it is necessary to:
1.
Access the voice guide by telephone call and code recognition.
(6)
2.
Press the button
to access the
(2)
3.
Press the button
to access the
4.
Enter the number of the output and press
5.
The play of the output description and its status (
6.
With the buttons
(2)/(5)
vious output.
(1)
a. Press the button
(0)
b. Press the button
7.
Press the button
(9)
to return to the previous menu.
Receiving a phone call in the event of an alarm
In the event of an alarm or special events (faults, technological
alarms, ...) the security control unit, if programmed, calls the pre-set
numbers, warning by voice about the event that activated the call.
Telephone indications, both voice and SMS can be started with
a few seconds of delay (maximum 255 seconds) based on the instal-
ler setting.
.
OUTPUTS
select the output (the voice guide tells
to activate the output.
to deactivate the output.
.
ADVANCED MENU
.
INPUTS STATUS
(*)
(E.g.
)
12*
open
it is possible to select the next or pre-
.
ADVANCED MENU
.
OUTPUTS STATUS
(*)
(E.g.
12*
,
active
deactivated
it is possible to select the next or pre-
to activate the input.
to deactivate the input.
CALL INTERRUPTION
Depending on the programming, the security control unit tries to call
the phones more than once.
If 3 attempts are set and only your call can be interrupted with button
(5)
on the mobile phone, the following occurs:
•
on phone 1 (listen only), 3 attempts;
•
on phone 2, (after the 1st attempt the button
sed) 1 attempt;
•
on phone 3 (listen only), 3 attempts.
If 3 attempts and interruptions are set for all calls with the button
of the phone, it will occur:
•
on phone 1 (listen only), 1 attempt;
•
on phone 2, (after the 1st attempt the button
,
,
closed
sed) 1 attempt;
•
on phone 3 (listen only), no attempt.
(0)
is pressed instead of (5), there are the same functions and also
If
a voice guide
Ask the installer about the order of phone calls. If the call to
the security firm occurs after the call in which the button
pressed, no communication will be made to the security firm.
)
).
Telephone 1
Telephone 2
Telephone 3
(5)
Telephone 1
Telephone 2
Telephone 3
(5)
(5) or(0)
is pres-
(5)
is pres-
is
Werbung
Kapitel
Inhaltsverzeichnis
