Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CODE PROPERTIES DISPLAYING
To display the code properties it is necessary to:
1.
Enter the User Menu.
(
)/(
)
2.
With
select
MANAGEMENT 05 USER CODE
▲
▼
3.
With
(
)/(
)
select
PROPERTIES
▲
▼
4.
With the buttons
(
)/(
▲
▼
a.
indicates which areas of the system can
ASSOC. AREAS
be managed by the code. With
(associated), with
b.
indicates the code permissions on the
PERM. ACTIONS
associated areas:
i.
LOCAL ACCESS
ii.
REMOTE ACCESS
Touch.
iii.
AREAS TURNING ON
iv.
AREAS TURN OFF
v.
AREAS MANAGEMENT
system as set in the permissions
the patrol function
Press (#)to exit and return to the previous menus.
5.
MANAGEMENT
USER CODE
PROPERTIES
ASSOCIATED AREAS
PROPERTIES
PERM. ACTIONS
The properties of the User Code cannot be changed. Contact
the installer if they need to be changed.
Management of other Users' Code
The codes can be of two types, private or public. Private codes can
change public codes while the reverse is not possible.
The codes tested are usually (family members, employees, apart-
ment block residents, security guards, etc.) while the public codes
are usually (children, maids, employees ...).
The properties of the codes are defined at the planning stage by the
installer.
Using the menu
MANAGEMENT 06 OTHER CODES
• Create / delete a code.
• Enable / disable an existing code.
• Change the code password.
• View properties.
• Change the code description
Do not use simple or easy to understand codes (dates of birth,
...).
and press (*).
and press (*).
)
scroll through the code properties.
(#)
the area is managed
(‒)
the area is not managed.
--> code valid from local keypad.
--> Via home automation App or
--> can only turn on areas
--> can only turn off
-->
manages the
TOTAL CONTROL
PATROL
05
LOCAL ACCESS
PERMITTED
REMOTE ACCESS
PERMITTED
AREAS TURN ON
PERMITTED
AREAS TURN OFF
PERMITTED
AREAS MANAGEMENT
TOT CONTROL
it is possible to:
If this menu item is not displayed, it means that the User
Code used to enter the menu is not enabled for this
management. Contact your Installer if you want to be
enabled.
The Installer is responsible to instruct the User on the
properties and management of the user code.
CODES ENABLING/DISABLING
To enable or disable a code of another User it is necessary to:
1.
Enter the User Menu.
(
)/(
2.
With
▲
(
)/(
3.
With
▲
(
indicates the user code index; the symbol
XXX
code,
means disabled code).
[-]
(
)/(
4.
With
▲
5.
The display shows the code enable status.
6.
Press
(+)
activates
7.
Confirm the execution of the desired action with (*).
CHANGE CODE
To change the User Code it is necessary to:
1.
Enter the User Menu.
(
)/(
2.
With
▲
3.
With
(
)/(
▲
code index; the symbol
indicates that the code is disabled) and press (*).
(
)/(
4.
With
▲
5.
Enter the new code and confirm with
5 and 6 digits are valid).
Repeat the new code and confirm with (*).
6.
Press (#)to exit and return to the previous menus.
7.
)
select
MANAGEMENT
06 OTHER CODES
▼
)
select the code to enable or disable and press
▼
)
and press (*).
select
ENABLE
▼
to enable or
(‒)
to disable.
MANAGEMENT
06
OTHER USERS
CODE
XXX
[*]
CODE DESCRIPTION
CODE
ENABLED
A and B SELECTIONS
ENABLED OR DISABLED
)
select
MANAGMENT 06 OTHER CODES
▼
)
select the code to be changed (
▼
indicates that the code is enabled,
[#]
)
and press (*).
select
▼
CODE
(*)
MANAGEMENT
06
OTHER USERS
CODE
XXX
[*]
CODE DESCRIPTION
CODE
ENABLED
CODE
*****
NEW CODE
******
and press (*).
(*)
means enabled
[#]
and press (*).
indicates the
XXX
[-]
(codes with length of 4,
CODE CHECK
*****
Werbung
Kapitel
Inhaltsverzeichnis
